From all-in-one linear actuators to servo programming tools, Futaba provides specialized products with dedicated uses.
Linear Actuator
Our high powered linear actuator is designed to be ideal for any item needing true linear motion. The unit boasts its all-in-one design that includes the drive train mechanics, electric motor, and advanced control board. Capable of S.Bus2 and produced to be IP64-level dust and water resistant, see what the LJ9DA41 can bring to your project.
LJ9DA41 (12V)
Linear Actuator
- – All-in-one design includes the drive train mechanics, electric motor, and
advanced control board - – 1st and 3rd gear made of metal, 2nd gear made of synthetic resin
- – Linear motion mechanism – Ball screw
- – IP64 level water/dust resistance
- – Dimensions – 197.6 x 51.1 x 99.3 mm or 7.78 x 2.01 x 3.91 in
- – Weight – 720 g or 25.4 oz
- – Max Thrust at 11.1 V – 36.7 kgf*cm or 360 N or 1295 oz*in
- – Rated Thrust at 11.1 V – 7.3 kgf*cm or 72.0 N or 259 oz*in
- – Speed at 11.1 V – 75 mm/sec or 3.0 in/sec (no load)
- – Voltage Range – 9.0V – 16.8V
- – Stroke – 50 mm or 1.97 in
SKU 01300208-1 Category Miscellaneous Tags 12V, Linear Actuator
AJ9DA/LJ9DA series are compatible with the following signal types:
– PWM: Conventional signal for servo of radio control use (ex. Pulse width of 1,520μS = center).
– S.Bus/S.Bus2: Futaba’s original serial signal format.
– RS485: Same as Futaba’s bi-directional protocol for “Command type servo for robot.”
– Do not use each protocol at the same time or the unit will get fatal damage.
– Analog DC output for monitoring the rod shaft position. The position can be monitored while powering up.
Servo Programming
A servo is only as good as its programming. Characteristics such as travel range, feedback gain, driving power, and many more are tunable with S.Bus and S.Bus2 servos. Using an FMT radio or the combination of a PC and our CIU-3, customize your Futaba servos to fit your needs.
CIU-3 Servo Programmer
USB Interface for Communication Between Link-Supported Devices (01102291-1)
- – USB Rev 2.0 Compliant Interface
- – USB Series A Connector
- – 18.2 x 56.5 x 9.0 mm or 0.72 x 2.22 x 0.35 in
- – 7.5 g or 0.26 oz
- – 5.0 V ±0.2 V (USB Bus Power)
- – Temperature -10 ~ 45°C
- – 5.8 ±1.7 mA
- – Windows 10 / 8 / 7 / Vista
- – A PC-Link Adapter (Double Extension Cord K500) supplied with CIU-3.
SKU 01102291-1 Category Miscellaneous